The top ten brand manufacturers of aluminum veneers tell you that the processing requirements of single aluminum sheet metal processing: complete rounding machine for cutting, punching, bending and processing curved plates, can realize the various shapes of sheet metal with basic size of 4 meters. Processing (many manufacturers can achieve more than 6 meters of processing, but the longer the length, the worse the flatness). Aluminum argon arc welding and high-frequency welding equipment to ensure the high quality of the welding, sealing and reinforced nailing process of the formed aluminum sheet; mechanized grinding and polishing equipment and 6.6 × 1.7 × 1 meter automatic pretreatment tank and The exclusive design of a 8 x 3 m and 8 x 2 m spray booth and oven can complete the processing of oversized plates and long sections, ensuring that the surface of the product meets the film requirements of the substrate required for painting.

Single aluminum plate spraying processing requirements: chemical pretreatment uses chemical solutions to remove organic and inorganic stains on metal surfaces. Then, the natural oxide layer is removed, and a chemical agent is used to generate an oxide film to cause rust prevention and permanent paint adhesion on the metal surface. Electrostatic coating uses the domestic advanced automatic electrostatic spraying line to spray the fluorocarbon coating on the metal base surface layer by layer according to the process requirements, and bake and cure according to the specific temperature and time.

Single aluminum plate quality assurance system requirements: quality inspection and packaging using high-precision special testing equipment to strictly test product quality, to ensure product dimensional accuracy meets corporate standards, film quality in line with the US AAMA-605 standard. The construction process of aluminum composite panels and aluminum veneers is generally the same. The big one is not that the aluminum-plastic panel is processed into the required shape and specifications at the construction site, and has a large degree of construction freedom. The aluminum veneer is processed and formed by the middle manufacturers. Due to the accuracy of the domestic equipment, some small troubles are often encountered during the construction process. In addition, in terms of the warranty period of the construction process, the mass production of aluminum-plastic composite panels is much faster than the production of aluminum veneers, and the schedule of the construction schedule is also higher.